SATA Hard Drives Configurations (Intel ICH7R)
- 4 -
Ác
Åé
¤¤
¤å
Step 2:
Later, select
Hard Disk Boot Priority
under
the
Advanced BIOS Features
menu. In the
Hard Disk
Boot Priority
submenu, select the model of the SATA hard drive onto which you intent to install
Microsoft Windows 2000/XP (Figure 2).
Figure 2
Step 4:
Save and exit BIOS Setup.
Figure 3
Step 3:
Set
First Boot Device
under the
Advanced BIOS Features
menu to
CD-ROM
to boot from CD-ROM
after system restarts (Figure 3).
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Hard Disk Boot Priority
1. SCSI-0 :
Intel Volume0
2. Bootable Add-in Cards
KL
: Move
PU/PD/+/-: Change Priority
F10: Save
ESC: Exit
Item Help
Menu Level
``
Use <
K
> or <
L
> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
`
Hard Disk Boot Priority
[Press Enter]
First Boot Device
[CDROM]
Second Boot Device
[Hard Disk]
Third Boot Device
[CDROM]
Password Check
[Setup]
# CPU Hyper-Threading
[Enabled]
Limit CPUID Max. to 3
[Disabled]
No-Execute Memory Protect
[Enabled]
CPU Enhanced Halt (C1E)
[Enabled]
CPU Thermal Monitor 2(TM2)
[Enabled]
CPU EIST Function
(
µù
)
[Enabled]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
`
Select Hard Disk Boot
Device Priority
