Introduction
This document describes how to install the Seagate® BarraCuda® 510 SSD on your computer. The Seagate BarraCuda 510
SSD is a versatile NVMe SSD that is optimized for maximum storage capacity with a wide range of application utilities. It is up to
6x faster than SATA SSDs and has TCG security to keep data safe and secure. See the SSD product documentation for
warranty and more details.
The BarraCuda 510 SSD comes in the M.2 2280 form factor and can be used in any computer system with an 80 mm long M.2
M-key slot.
Note
The desktop and laptop shown in this document are for demonstration purposes only. Your computer might be different than the ones shown
here but the procedure is the same.
Warranty
5 years limited warranty. See:
https://www.seagate.com/support/warranty-and-replacements/limited-consumer-warranty/
Ensure that you review any warranty policy and instructions provided by your motherboard and computer manufacturer and you
follow appropriate procedures to install your storage device. By proceeding with any installation, you agree to be solely
responsible for any failure to follow any manufacturer's instructions.
Preparing for Installation
●
Unpack the SSD.
●
Inspect the SSD for any damages.
●
Power down and power drain your computer according to the instructions provided in the computer product documentation
●
Backup the data from the existing storage device.
CAUTION
Electrostatic discharge (ESD) can damage the SSD. Make sure that you install the SSD at an ESD-safe
workstation. As a precaution, ground yourself to protect the device from any static electricity present in your
body.
Required Tools
A suitable screwdriver and screws to fasten the M.2 SSD.
Seagate BarraCuda 510 Installation Guide, Rev. A
4
