manualshive.com logo in svg

Seagate 77767496, Руководство по эксплуатации продукта, Страница: 149 / 432

Поделиться
Скачать
Seagate 77767496 Скачать руководство пользователя страница 149

Fibre Channel Interface Manual, Rev. D

135

Field definitions (listed alphabetically)  

  

 

DF_CTL (Data Field Control)    

00h

No optional Fibre Channel headers are used.

D_ID (Destination Identifier)    

The address of the initiator that originated the command for which the data is being requested.

F_CTL (Frame Control)    

Set to 890000h for FCP CMND frames. This indicates the frame is sent by the responder of the exchange, not the origina-
tor, and the frame is the last of the Fibre Channel sequence. Sequence initiative is transferred so the initiator may send the 
requested data.

OX_ID (Originator Exchange Identifier)    

The drive returns the OX_ID it received from the initiator with the FCP CMND.

Parameter    

Not used for the FCP XFER RDY.

R_CTL (Routing Control)    

Set to Data Descriptor.

RX_ID (Responder Identifier)    

Not used by the drive. The value of FFFFh indicates the RX_ID is not being used.

SEQ_CNT (Sequence Count)    

0000h

Indicates that this is the first frame of the Fibre Channel sequence. The FCP XFER RDY is a single frame 
sequence.

SEQ_ID (Sequence Identifier)    

The drive sends FFh.   

S_ID (Source Identifier)    

Address of the drive.

Type    

08h

For all SCSI FCP frames.

Table 

number

80

80

80

80

80

80

80

80

80

80

80

Содержание 77767496

















































































































































































































































































































































































































































Отзывы:

Нет отзывов