Seagate 3.5-inch Pushbutton Backup External Hard Drive, Быстрый старт

Страница: 4 / 21

4
Quick Start Guide
Requirements
Windows 98SE or later operating system with:
• a USB connector
or
• for a dual-interface kit, a Windows-certified,
OHCI-compliant FireWire (IEEE 1394a) controller
Microsoft maintains a list of Windows-certified
FireWire (IEEE 1394a) controller suppliers at
http://www.microsoft.com/windows/catalog/.
Click the
Hardware tab, and then select Other
Hardware/1394 controller for the complete list.
Macintosh System 9.2.2 (or higher) or
Mac OS X with:
• a USB connector
or
• for a dual-interface kit, an OHCI-compliant
FireWire connector
• Macintosh format (initialization) required.
See Mac format section on page 9
Note. BounceBack Express does not support the pushbutton
backup feature for a Mac OS that is using a USB interface.
Cautions
If your drive is turned on, don’t move it.
You can safely move your drive when the power LED
is OFF. If the power LED is lit when you move your
drive, you risk excessive wear, reduced reliability,
and possible data loss.
Dual-interface kit: Use only one interface
at a time.
Do not simultaneously connect USB and the FireWire
(IEEE 1394a) cables to your drive. However, you can
connect two FireWire cables to your drive at the same
time to daisy-chain FireWire devices.
Note. When using the FireWire (IEEE 1394a) connectors in
a daisy chain configuration, the drive must be powered on
for the pass through connection to function.
Multi-function push button operations.
• Press and hold button until LED comes on—
1st Power On occurs.
• After Power On, press button—initiates backup.
• Press and hold button until LED shuts off—
Power Down occurs.