Seaga JDL-2 COMBO Скачать руководство пользователя страница 2

Страница: 2 / 78

JDL V1.0 8 2022

INTRODUCTION

Congratulations on the purchase of your vending machine. This vending machine has been designed to give

you many years of dependable service. It requires little maintenance and is easy to set up and operate.

READ THIS MANUAL COMPLETELY

Your vending machine is designed to operate simply and reliably, but to take full advantage of your vendor,

please read this owner’s manual thoroughly. It contains important information regarding installation and

operations, as well as a brief trouble- shooting guide.

EQUIPMENT INSPECTION

After you have received your vendor and have it out of the box, place it on a secure surface for further in-

spection. Note: Any damages that may have occurred during shipping must be reported to the delivery carrier

immediately. Reporting damages and the seeking of restitution is the responsibility of the equipment owner.

The factory is willing to assist you in this process in any way possible. Feel free to contact our Customer Care

Department with questions you may have on this process.

It is important that you keep the original packaging for your vending machine at least through the warranty

period. If your machine needs to be returned for repair, you may have to purchase this packaging if it is not

retained.

Vendor must be located a minimum of five(5) inches away from walls and obstructions on the right side to

allow the doors to fully open for loading products and maintenance purposes.

Once you have your vendor located, we suggest that you keep this manual for future reference, or you

can view this manual online at www.seaga.com. Should any problems occur, refer to the section entitled

“TROUBLESHOOTING”. It is designed to help you quickly identify a problem and correct it.

seaga.com

For Service and Customer Care in the US:

8:00 a.m. - 5:00 p.m. CST. Mon thru Fri

815.297.9500 option 1

email: [email protected]

Seaga Manufacturing, Inc.

700 Seaga Drive Freeport, IL 61032 U.S.A.

Содержание JDL-2 COMBO















































































Результаты поиска

Содержание JDL-2 COMBO

Отзывы:

Похожие инструкции для JDL-2 COMBO

Бренды по названию

Популярные бренды

Seaga JDL-2 COMBO, Руководство по обслуживанию и запасным частям

Результаты поиска

Содержание JDL-2 COMBO

Отзывы:

Похожие инструкции для JDL-2 COMBO

Бренды по названию

Популярные бренды