Seaga INF4B, Руководство по обслуживанию и запасным частям

Страница: 45 / 77

45 Revision 2.EL950 1.3.1074C 18.6
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 7 for Pair menu Pair - - - *-Exit
5. Enter the first motor number Pair 013 to --- *-Exit #-Add
6. Press # and enter the 2nd motor number Pair 013 to 015 *-Exit #-Save
7. Press * two times to add another pair of motors or Pair - - - *-Exit #-Save
8. Press * five times to exit to Sales Mode 0.00
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 8 for Degrees menu Degrees - - - *-Exit 8-Edit
5. Press 8 to Edit Toggle between F and C
6. Press # to save or * to Exit Degrees - - - *-Exit #-Save
7. Press * five times to exit to Sales Mode 0.00
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 7 for Motor count display menu Motors (Count Flashes)
3. Press * to exit to Sales Mode 0.00
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 8 for Selection motor test menu Selection: --
3. Enter selection to test and wait Selection: (Current Selection) *-Delete
4. Repeat for any other selections or Selection: (New Selection) *-Delete
8. Press * to exit to Sales Mode 0.00
PAIR
This function allows two adjacent motors to run at the same time so that large, wide items can be
accommodated. A coil and rail change is also required. See Combining Selections section of this manual for
more information.
DEGREES
This function allows you to change from Fahrenheit to Celsius.
MOTORS
This function displays the motor count. It is a useful, quick diagnostic tool in case of selection failure and
can point out a motor issue if the count is not correct.
SELECTION
This function tests the motor on one specified selection.