4. Highlight “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties” (Figure 5).
Figure 5
5. Set the IP address and Subnet mask as shown in (Figure
6. Select “OK” and close all windows.
7. Using the Windows search bar type “Remote Desktop”
and hit enter.
8. Type in the IP address: 192.168.1.8 as shown in Figure 6
V1
-
7/26
/
21
Page 4 of 5
Seaf
l
oor Systems, Inc. | info@seaf
l
oorsystems.com | +1(530) 677-1019
Figure
6
Setup Cont.
9. Make sure the Username to log in is “ANP”
10. The password is Seafloor (capital "S")
