G24 HDMI User Guide
2.
Hardware Overview
2.1.
Front Panel
No.
Name
Function Description
1
Power LED Power LED will be on when the unit is powered on.
2
INPUT LED The LED will be on when the corresponding HDMI input port is connected
to active HDMI source device.
3
LOOP LED The LED will be on when the corresponding LOOP OUT port is connected
to HDMI display device.
4
OUTPUT
LED
The LED will be on when the corresponding HDMI output port is
connected to HDMI display device.
2.2.
Rear Panel
No.
Name
Function Description
1
INPUTS
HDMI signal input ports, connect to HDMI source devices
2
LOOP OUT HDMI signal loop out ports. Loop out HDMI A/B signal to downstream.
3
OUTPUTS HDMI signal scaling output for video wall.
4
12V/3A
DC 12V/3A power supply port.
5
GND
Ground the product housing.
6
AUDIO
OUTPUT
TOSLINK:
•
Analog L/R audio output: 3.5mm Stereo Jack
•
Digital SPDIF audio output
BALANCED OUT: 5-pin phoenix connector, 20Hz ~ 20kHz, 1.5Vrms max.
7
SERVICE
Firmware update port
8
CONTROL LAN: Unit IP control
RS232-CTL: Unit RS232 control
RS232: Loop out from RS232-CTL
1
2
4
3
