background image

5

General Operation

Turn Unit on/off, Change the Source 

• 

Press the       

/SRC

 button to turn on the unit. Press and hold the  

     /SRC

 button to turn off the unit.

• 

Press the       

/SRC

 button to select the different modes: Radio, USB(with USB device inserted), AUX-IN

(aux audio input) and BT(Bluetooth) modes.

Adjust the volume 

Rotate the volume knob to increase or decrease the volume level.

Push-To-Talk

Press the        button (volume knob) to access to smartphones voice assistant capability via Bluetooth.

 Adjust Menu Options

 • Press and hold the 

volume knob to enter into setting menu, then press the volume knob repeatedly to 

    select setting items:

   - ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings.     

     Rotate the volume knob to preset the illumination to middle, high or low.
   - BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7
   - BALANCE:L7, L6,~, L1, 0, R1,~,R6, R7
   - FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
   - Loudness: LOUD ON/OFF

   - EQ(Equalizer) Setting: 

OFF, FLAT, CLASSIC, POP, ROCK, JAZZ 

   - Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.            
   - DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
   

- CLOCK 12/24: Select between 12 hours and 24 hours display.

     Note: If 12 hour display is selected , AM= Morning; PM= Afternoon

   - AREA US/EU: This car radio is equipped the USA / Europe frequency.   
     Rotate the volume knob to switch between USA and Europe frequency. 
     The system will change the frequency setting in about 3 seconds.

 • Rotate the 

volume knob to change values.

Mute On/Off

In power on mode, briefly press the 

MUTE

 button to toggle mute on or off. 

Setting the Clock

Press and hold the 

CLK

 button to display time. Press and hold the 

CLK 

button again the hours digits start 

flashing on the display. Set hours by rotating the volume knob. Briefly press the 

CLK

 button. 

The minute digits start flashing.  Set minutes by rotating the volume knob.

USB Port

Connect to a USB storage device for audio play, or charging of a mobile phone.

Hands-free Microphone

To receive your voice when you calling by using this bluetooth handsfree system.

Aux Audio Input Jack

Connect to the headphone jack on an external device (e.g. a mobile phone or MP3 player) for audio play.

Reset

Push the RESET button with a thin object with a pointed end to reset the unit.
This function may be used when the LCD does not display normally or sound is distorted, or when any of
controls are disabled.

Содержание 72101















Отзывы: