Seac Q1, Инструкция по эксплуатации

Страница: 13 / 44

13
TECHNICAL SPECIFICATIONS
• Shock-resistant ABS body.
• Spotlight optics.
• Smooth-surface reflector.
• Polycarbonate glass lens.
• Non-slip thermorubber ring nut body.
• Mechanical microswitch.
• 1 high light efficiency LED, Color temperature 4,250 °K.
• Twin O-ring fitted on lens seal.
• Battery holder specially shaped for parallel use of 4 or 8 batteries.
CHARACTERISTICS Q1
Output 6 W
Volt 5.0 V
Type of batteries
Requires the use of 1.5 V (R6) AA alkaline
batteries. 1.2 V rechargeable batteries of the
same size can also be used.
Lumens rating 150
Battery housing
Compartment specially configured for use of 4 or
8 batteries in parallel
Light source
1 LED
Color temperature 4,250 °K
Light beam Concentrated
Burntime, hours *)
16 at full power
Over 25 at reduced power
Maximum depth 100 m
*) The burntime shown is approximate because it depends on the quality of
the batteries used. We recommend using high quality alkaline batteries. 1.2 V
rechargeable batteries commonly found on the market can also be used. If
rechargeable batteries are used we cannot guarantee the burntime and light
output shown on the technical sheet.
English
10960-manuale seac Q3-Q1-rev B.indd 13 08/02/2016 11.13.02