DOCS-010 Manual, SeaBotix Inc. Users, 200 Series – 18 Mar 09 - Rev B - Page 25 of 52
5. Select the year by using the keypad.
6. Press ENT
7. Enter the hour of the day in 24 hour time by using the keypad.
8. Press ENT
9. Enter the minute of the hour by using the keypad.
10. Press ENT
11. Enter the second of the minute by using the keypad.
12. Press ENT
2.3.3.2
Units/Water Type
a. Pressing the 2 key will allow you to adjust the type of measurement being
used. To adjust the units and water type, select from the four options. The
LBV will calculate the depth depending upon which unit of measurement is
selected. Operating in an unselected water type will result in inaccurate depth
information.
1. Metric/Seawater
2. Feet/Seawater
3. Metric/Freshwater
4. Feet/Freshwater
2.3.3.3
Display Type
a. This menu is used to set the display type used with the LBV.
1. NTSC/PAL M/N
2. PAL B/G
3. PAL I
4. PAL D/K
2.3.3.4
User Text
a. Pressing the 4 key will take you to the next screen for inputting user text.
To input user text, simply press the appropriate key on the keypad to cycle
through the letters until you find the first letter desired. Once the letter is
shown on the screen, press the ENT key to move to the next character.
Repeat this process until all the characters are displayed as desired.
Pressing the “0” key twice plus ENT will insert a space. Note the space will
not be apparent until you enter the next character. Press the * when
finished.
To clear the user text from the Setup Menu (see section 2.3.3), press 4 to
start entering user text. Then press the
#
key followed by the
*
key.
