•
Press the MAX/MIN button in normal mode,MAX appears on the display.
•
You can now get the highest values for the indoor and outdoor temperature and humidity since the last
reset.
•
Press the MAX/MIN button again,MIN appears on the display.
•
You can now get the lowest values for the indoor and outdoor temperature and humidity since the last
reset
.
•
Press the MAX/MIN button once more, to go back to the present values display.
•
The device will automatically quit the MAX/MIN mode if no button is pressed.
•
Press and hold the MAX/MIN button for two seconds while the maximum or minimum values are
displayed to clear the recorded readings.
9. Thermometer and hygrometer
9.1 Maximum/Minimum function
Please note that the forecast symbol will become more defined in the course of operation. The forecast
sym
bol is active right from the start, however, the reliability of the forecasts increases with the amount
of
data
collected. The sensor must adapt initially to the reference level at the site.
Note:
9.2 Setting of the temperature unit
•
In the normal mode you can change between
°
C
(Celsius) or
°
F
(Fahrenheit) as temperature unit.
•
Press the +/
°
C
/
°
F
button.
•
For having more than one additional outdoor transmitter select with the 1/2/3 switch in the battery
compartment of the outdoor transmitter for each single outdoor transmitter a different channel. The
reception of the new transmitter will be transmitted automatically to the
receiver
. Press and hold the
SEARCH
button on the
receiver
or restart the
receiver
according to the manual.
•
The outdoor values will be shown on the display of the
receiver
.
10. Additional outdoor transmitters
9.3 Temperature and humidity trend function
indicates
rising
temperature
readings
(
temperature
gone
up
more
than
2
degrees in an hour)
• Temperature trendIndicators
indicates
steady temperature readings
indicates
falling temperature
readings
(
temperature
gone
down
more
than
2
degrees in an hour)
indicates
rising
humidity
readings
(
humidity
gone
up
more
than
1
%
in an hour)
• Humidity trendIndicators
indicates
steady humidity readings
indicates
falling humidity
readings
(
humidity
gone
down
more
than
1% in an hour)
•
If
the
measure
values
above
the
range
,
then temperature
display
"
HH
.
H
",
humidity
display
"
HH
%".
•
If
the
measure
values
below
the
range
,
then temperature
display
"
LL.L
",
humidity
display
"
LL
%".
•
With the foldable leg at the back of the
receiver
, the
receiver
can be placed onto any flat surface or
wall mounted at the respective location by the hanging holes at the back of the unit. Avoid the vicinity
of any interfering field like computer monitors or TV sets and solid metal objects.
•
With the hanging hole at the back of the outdoor transmitter, the transmitter can be wall mounted at
the respective location. Choose a shady and dry position for the outdoor transmitter. (Direct sunshine
falsifies the measurement and continuous humidity strains the electronic components needlessly).
•
Check the transmission of the signal from the outdoor transmitter to the
receiver
(transmission range
of
up to
6
0 m free field). Within ferro-concrete rooms (basements, superstructures), the received
signal is
natu
rally weakened.
•
If necessary choose another position for the outdoor transmitter and/or receiver.
11. Positioning and fixing of receiver and the outdoor transmitter
-6-
