Sea&Sea MDX-D600, Инструкция по эксплуатации

Страница: 12 / 28

1
2
3
4
E-11
CAUTION
Attaching and Detaching the Port
Make sure that the port lock pin is
engaged with the notch in the port.
Pull the port lock on the underside
of the quick shoe base toward
OPEN until you hear the sound
of it clicking into place
Align the positioning mark on the
front case with the OPEN mark
on the port, insert the port into
the front case, and then rotate
the port in a clockwise direction
until it stops
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
Make sure that the positioning
mark on the front case and the
LOCK mark on the port are aligned
Push the port lock toward LOCK
until you hear the sound of it
clicking into place
CAUTION
Only the optional ports designed for SEA&SEA digital SLR camera housings
can be attached to this product.
Ports have different depth rating. Check the depth rating for each before
use.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
OPEN
LOCK
OPEN
LOCK
Port lock pin
Positioning mark