E-16
LCD Monitor Hood with Lens
The LCD monitor hood holder on this product accepts the LCD monitor
hood with lens (#52121).
CAUTION
When attaching LCD monitor hood to the LCD monitor hood holder,
always make sure to refer to and follow the instructions in the
accompanying instruction manual.
Desiccant Pack (OZO)
A substantial difference between the external (water) and the internal
(camera and air) temperatures sometimes result in dewfall on the inside
surface of the housing lens. This phenomenon typically happens when
the camera becomes hot due to long and consecutive use.
To mitigate the effect of the dew, use the desiccant pack (Option) as
follows;
●
Make sure that the edge of the desiccant pack is not covering the O-ring contact surface.
●
Make sure thet the desiccant pack is not trapped when closing the rear cover.
Using the desiccant pack (OZO)
Install the 6G camera to the housing
Place a desiccant pack (OZO) at the location as
shown, then close the rear cover
1
2
