SEA HALF TANK, Руководство по установке

Страница: 8 / 24

Fig. 11
(1)
PRELIMINARY
-Open the package carefully, paying attention to not lose
the parts reported in fig.4
-Fix the oscillating fork as in fig.11.
Attention: do not use the hammer to insert the short brass
pivot; the insertion of the pivot into the fork and bracket must be
made simply by hand pressure.
Attention
Do not incline the hydraulic operator further
then the allowed angle from the oscillating
fork (1), could cause the braking of it (1).
OSCILLATING FORK INSTALLATION
BACK FIXATION MOUNTING
According to the chosen opening type (inside or
outside) and according to the chosen max.
rotation of the leaf (see page 21-22) the bracket
must be first cut respecting the mesurment “a” on
pag. 21-22 and than welded as in fig.14.
The support must be positioned so that the
operator is in perfect horizontal position (Fig. 14,
Fig.15).
Adjustable back fixation (with screw)
(Accessories on request)
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
67411170
Fig. 12
Fig. 13
55 mm
65
m
m
Fig. 14
98
m
m
8 mm 5
HALF TANK - MINI TANK
English English
23
REV 06 - 03/2015