SEA 157S, Предварительное руководство по обслуживанию, Страница: 17 / 57

Add New Selecting Add New will open a blank entry page
where a Name and Number may be added. The Name may
be up to 15 characters long. The DSC ID field is 9
digits. The Phone Number may be up to 18 digits.
Edit Selecting Edit will allow the current entry to be
modified. Use the rotary control to move the cursor
and the keyboard to enter new information. When the
edit is complete, press ENT to save the entry into
the list and return to the List Display.
Delete
An entry may be removed from the list with this
option.
3.4.14.7 Factory Reset
The Factory Reset option is used to return all
configuration parameters to their factory default
condition. A confirmation is required to perform
the reset. Selecting NO will abort the action and
return to the Configuration Menu.
3.4.14.8 Set DSC ID
Selecting this menu item will display the radio’s
current DSC ID. Press ENT key to open the edit
mode, then use the keypad keys to modify the ID.
Press ENT to save the changes. Press the FUNC key
to return to the Configuration Menu. Pressing 16#
or DIST key will exit immediately without saving
. any changes
NOTE: The DSC ID may be changed only twice after
factory initialization.
3.5 DIGITAL SELECTIVE CALLING OPERATING SYSTEM
3.5.1 TRANSMITTING A DISTRESS CALL
A distress DSC call may be initiated using the following
procedure:
1) Press either the local DIST key or the remote DIST key. An
alert tone will sound while the key is held.
2) Select from the list of available distress conditions shown.
If the radio is not supplied with positioning information from a
GPS or other device, you will be prompted to enter the Lat/Long
position. You may skip this step in an emergency and go back later
to enter the position. To manually enter the position, use the
keypad to input the digits and the rotary control to move the
cursor.
3-7