Sea Tel DAC-03, Инструкция по установке и эксплуатации

Страница: 29 / 80

DAC-03 Tracking Antenna Controller Basic System Information
3-5
The Antenna Control Unit is connected to the Antenna Pedestal (ADE), the GPS antenna and the
ships Gyro Compass.
Figure 3-3 Antenna Control Unit
3.3.3. Below Decks AC Power Supply
AC Voltage
- An appropriate source of AC Voltage (110 VAC 60 Hz OR 220 VAC 50 Hz) will also
be required for all of the below decks equipment. The AC voltage source should be well regulated
and surge protected. Uninterrupted Power Supplies are frequently installed to provide power for
the below decks equipment, and in some cases it supplies the above decks equipment too. Refer to
the Specifications section of this manual for the power consumption of the ACU. Refer to the
manuals for your other below decks equipments for voltage and power consumption of each of
these devices. Total power consumption will depend on the number of components connected to
this power source.
3.3.4. Other Below Decks Equipment
Your system will include other equipment below decks to process the signal(s) from your antenna
into the services your system is configured to provide. Refer to your Antenna manual for more
information about some of the basic equipments associated with your system.