3
To attach the ground wire, use an existing screw or stud and
nut inside the housing to secure the ring terminal. If, these
are not available, then use the provided self-tapping screw
to secure the ring terminal
5
2D
B
GROUND WIRE
RING TERMINAL
Insert the fixture ground wire to an available port.
6
2E
B
GROUND TERMINAL
FIXTURE GROUND
WIRE
2F
B
Reconnect the top and bottom socket adaptor terminals.
NOTE: To ensure proper connection, the connectors
have been marked with the letter B and a black line.
7
7
PORT MARKED “B”
PORT MARKED WITH
BLACK LINE
SELF-TAPPING
SCREW
Install the Fixture
Squeeze the torsion springs on each size and insert them
in between the c-shaped hooks located on both sides of
the recessed can.
Push the fixture flush against the ceiling.
Make sure that
the fixture is secure before releasing.
C-SHAPE
HOOKS
3A
1
TORSION
SPRING
Install the fixture to the recessed can according to the
mounting method used:
For torsion spring method, continue to step 3A
For friction spring method, skip to step 3B
Push the fixture into the recessed can so that torsion clips
grip the inside walls of the can.
Push the fixture flush against the ceiling.
Make sure that
the fixture is fully secure before releasing.
3B
3
FRICTION
SPRING
4
2
