2
1A
8
1
Assemble the mounting plate by installing the nut onto the threaded nipple leaving three threads exposed above the
nut, then screw the shorter end of the threaded nipple to the mounting plate.
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Place the fixture base onto the threaded nipple and secure it by tightening the cap nut onto the threaded nipple.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Place the gasket on the lip of the shade, then insert the shade into the fixture so that shade lip is above the inner tab
and secure it in place using the shade screw.
For item # 8909, the shade must be screwed into the fixture.
Note:
For wet locations, caulk around the base with waterproof construction sealant.
1
2
3
4
5
6
2
4
ELECTRICAL BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE SCREW
FIXTURE BASE
CAP NUT
Install the Fixture
MOUNTING
PLATE
5
8
SHADE SCREW
SHADE
NUT
THREADED
NIPPLE
7
8
9
GASKET
6
