background image

 

          

 

                     SEA-FIRE MARINE – USA                          SEA-FIRE EUROPE, LTD                                                                                                                       
                       Baltimore, Maryland                          Hampshire, United Kingdom                 

      Your Onboard Safe Choice                                www.sea-fire.com                               www.sea-fire.co.uk 
    A Division of Metalcraft, Inc.                                                                                                                                                                       123-652 REV - 

 

Machinery Shutdown Restart  

System (MSRS) 

Installation Instructions  

Owner’s Manual  

 

PN: 131-740 (4 Relay Circuits), PN: 131-745 (6 Relay Circuits), and PN: 131-750 (8 Relay Circuits) 

 

 

 

Warning: This Sea-Fire Machinery Shutdown Restart System has been designed and tested for use with Sea-Fire automatic and manual 
Fire Suppression Systems.  Installation must be accomplished by or under the supervision of a qualified marine electrician who is familiar 
with American Boat and Yacht Council (ABYC) or other recognized and accepted marine standards and practices. 
 
Caution: Do not install this device in fuel storage compartments.  See the installation section of this manual for further details.   
 
Read this manual thoroughly and comply with all instructions, warnings, and cautions prior to installation. 
 
 
THIS MANUAL IS AN INTEGRAL PART OF THE SYSTEM AND AS SUCH, THE SYSTEM MUST BE INSTALLED AND MAINTAINED 
ACCORDINGLY. 

RETAIN THIS MANUAL FOR REFERENCE 

 

Содержание 131-740












Отзывы: