Sea Eagle Stealth Stalker STS10 Скачать руководство пользователя страница 17

16

StealthStalker| 

REPAIRS

Apply patch to the boat. 

Smooth with finger or a 

smoothing tool such as a 

spoon, handle of a utility 

knife, or screwdriver. For 

best results, heat patch 

with a hair dryer 10-20  

seconds and smooth with 

tool.

Patching Tips:

•  The chamber must be deflated or the air will force a path 

through the glue.

•  Keep the patch size to a minimum, the bigger the patch, 

the harder it is to seal. The most common repair failures 

occur because the patch is too big.

•  For repairs larger than a puncture, overlap the damage area 

by about ½” on each side. 

•  Do not apply the patch while the glue is wet. 

•  Covering a leaking patch with another patch rarely fixes the  

problem. To remove a patch, heat it with a hair dryer and 

peel it off.
•  For field repairs, allow at least an hour to cure. Other  

repairs, allow to cure overnight. 

•  Patches can be removed by heating with a hairdryer.

•  Never 

use a heat gun on your boat.

•  Clamps and weights are not needed.

For a demonstration of good patching technique, please view 

the 

How to Repair

 video on the instruction page of our web 

site. There is a link at the bottom of every page at  

SeaEagle.com 

or type “instructions” into the search box. 

Floor Drains 

 

If you suspect the drains are leaking, prop the front of the boat 

up and fill it with enough water to cover the drains. If water is 

leaking: 

 

  •  Clear any sand in the threads

  •  Heat drain bases with a hair dryer (30 seconds).  

 

Bases can become misshapen when boat is tightly folded for 

long periods.  Heating will return base to its original shape.  

Replace cap when done. 

 

  

Caution

: Do not allow hot hairdryer element to touch 

base. Hot element will melt base.

Apply glue to the patch 

and boat. Allow to dry 15 

minutes. Glue must be dry 

to the touch. If glue layer 

is thin, apply second coat, 

allow to dry 15 minutes.

Pro Tip: Trace the outline 

of the penny on masking 

tape and cut with a utility 

knife. Apply tape to the 

boat instead of tracing on 

the boat.

Cut patch along the outline 

with scissors.

Contact Us

 

Unlike many other companies today we pride ourselves on  

answering the phone and helping you with any concerns, 

questions or special ordering needs that you may have!  

Feel free to give us a call at 

1-800-748-8066

 and we will be 

happy to talk with you! Our business hours are Monday to  

Friday from 9AM to 5PM, EST.

Sea Eagle Boats Inc.

 

19 N. Columbia Street, Suite 1 

Port Jefferson NY 11777

1-800-748-8066

 

[email protected]

Содержание Stealth Stalker STS10



















Отзывы: