6
Wide End Adapter:
fits inside the air valve.
Twist Cap Adapter:
twists onto the air valve like a
bottle top.
Open the cap of the air
valve and twist on or
insert the adapter.
Pump until firm &
wrinkle free. You should
be able to press your
thumb about a 1/2” into
the tube when the tubes
are properly inflated.
Inflate seat until
comfortably firm.
Tighten valves firmly to
avoid deflation.
(Wide End adapter
shown.)
Screw the valve into the
base tightly and unscrew
the cap.
MB-80 Electric Pump
(OPTIONAL)
This electric pump
works using the 12V
power outlet in a car or
with the optional Minn
Kota Power Center.
First, check that the
pump is switched OFF
before inserting the
power adapter into
your car’s power
outlet.
Directly insert the
pump (nozzle) into the
valve fill port.
Please note the valve
adapters and black
tube that come with
the MB-80 are not
necessary for Sea Eagle
boats.
Battery Connector
(OPTIONAL)
You can also power
your MB-80 using the
optional battery
connector which will
allow you to use the
pump while connected
directly to a 12V car or
marine battery.
WARNING:
Always connect the red clip to the positive
pole and the black clip to the negative pole. Cross
connecting wires could damage both the pump and
boat.
Warning:
Air compressors that
are designed for other
uses, like tire inflation
(usually around 32 PSI)
can easily harm your
Sea Eagle which works
at a much lower pres-
sure. For this reason we
recommend only using
Sea Eagle pumps.
Содержание PackFish 7
Страница 5: ...4...