Recessed Air Valves
Remove the cap and
press and turn the valve
stem counterclockwise
so that the stem is in
the UP position. When
the stem is in the up po-
sition the valve will re-
tain air. Turning the
stem clockwise will put
the valve in the down
position for deflation.
Foot Pump
Open the foot pump and
screw the hose into the
OUT port of the pump.
Recessed Adapter
The recessed valve
adapter is located inside
of the orange repair kit
canister.
After locating the re-
cessed valve adapter,
insert the ribbed end
into the hose. We rec-
ommend having the foot
pump with your boat at
all times.
BTP Turbo & BP12
Electric Pumps
(OPTIONAL)
These electric pumps
comes with a nylon
shoulder carry bag, 12V
DC power supply, hose
and adapters.
Included are a cluster of
seven valve adapters,
with raised numbers on
each arm of the cluster.
The adapter marked
number 1 is the only
adapter needed for your
Sea Eagle.
Take adapter number 1
from the cluster and
firmly push it into the
grey tube in the end of
the hose. To ensure that
the adapter is fully
seated on the tube,
push it until the end of
the tube pushes past
the raised ring in the
adapter.
Connect the other end
of the hose to the red
inflation port at the top
of the pump, located
near the ON and OFF
buttons.
5
INFLATION: VALVES & PUMPS