5. When ready to set off, turn the Master Switch to the
On position shown in figure 3.
6. Pull and hold both Triggers to start the Propeller.
(There is a short delay before the Propeller begins
to rotate).
7. To stop the Propeller, simply release the Triggers.
8. Always turn the Master Switch off when out of the water.
9. Proper posture when using the SEA-DOO
®
SEASCOOTER
™
is important to achieve the maximum
speed - see figure 4 for the correct position of the
SEA-DOO
®
SEASCOOTER
™
when using it.
Fig.3
SEASCOOTER GTI / VS SUPERCHARGED PLUS
Shown in "ON" position
Rotate to turn "OFF"
CAUTION
Do not dive deeper than you would normally when snorkeling,
to ensure you can get back to the surface safely.
Important Notice: This machine is not to use to mix
or to work with sand, concrete and material with
similar physical characteristics. This machine is
only to use for diving in water.
9
8
SEASCOOTER PRO
Shown in "ON"
position
Rotate to turn
"OFF"
Fig.4
PRO
GTI
VS SUPERCHARGED PLUS
GTS
