Sea-doo 2014 Spark Series Скачать руководство пользователя страница 52

Страница: 52 / 148

EQUIPMENT

1) Glove Box

A small storage compartment for per-
sonal articles, and the

SAFETY DVD

video, located at front of seat.

NOTE:

Glove box is not watertight.

Push tab forward to open glove box.

smo2014-005-006_a

1. Glove box
2. Tab

2) Safety Equipment Kit

Storage Compartment

A small area to store safety equipment
kit or emergency kit only (not supplied
with vehicle).

NOTICE

This area is not intended

for general storage. Do not store
any other items in this area. Storing
other items in this area can damage
the vehicle.

To open this storage compartment,
manually release and remove the RH
side panel.

smo2014-005-042_a

1. RH side panel

smo2014-005-043

TYPICAL - RH SIDE PANEL REMOVED

3) Storage Bin

(Convenience Package)

A convenient area to carry personal ar-
ticles.

To open the storage bin front cover,
release the lid hooks on each side.
Always close and latch cover when rid-
ing.

______________

Содержание 2014 Spark Series





















































































































































Результаты поиска

Содержание 2014 Spark Series

Отзывы:

Sea-doo 2014 Spark Series, Руководство оператора, Страница: 52 / 148

Результаты поиска

Содержание 2014 Spark Series

Отзывы: