Sea-doo 2011 GTS Pro Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 132

background image

– The 2011 Sea-Doo personal watercraft must be purchased in the country in

which the purchaser resides.

– Routine maintenance outlined in the Operator’s Guide must be timely per-

formed in order to maintain warranty coverage. BRP reserves the right to make
warranty coverage contingent upon proof of proper maintenance.

BRP will not honor this limited warranty to any private use owner or commercial
use owner if the preceding conditions have not been met. Such limitations are
necessary in order to allow BRP to preserve both the safety of its products, and
also that of its consumers and the general public.

6. WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must cease using the Sea-Doo personal watercraft upon the appear-
ance of an anomaly. The customer must notify a servicing BRP distributor/dealer
within two (2) days of the appearance of a defect, and provide it with reasonable
access to the product and reasonable opportunity to repair it. The customer must
also present to the BRP distributor/dealer, proof of purchase of the product and
must sign the repair/work order prior to the start of the repair in order to validate
the warranty repair. All parts replaced under this limited warranty become the
property of BRP.

7. WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repairing
parts found defective under normal use, maintenance and service, or replacing
such parts with new genuine BRP parts without charge for parts and labor, at any
authorized BRP distributor/dealer during the warranty coverage period under the
conditions described herein. No claim of breach of warranty shall be the cause
for cancellation or rescission of the sale of the Sea-Doo personal watercraft to the
owner.

In the event that service is required outside of the country of original sale, the
owner will bear responsibility for any additional charges due to local practices
and conditions, such as, but not limited to, freight, insurance, taxes, license fees,
import duties, and any and all other financial charges, including those levied by
governments, states, territories and their respective agencies.

BRP reserves the right to improve or modify products from time to time without as-
suming any obligation to modify products previously manufactured.

8. TRANSFER

If the ownership of a product is transferred during the warranty coverage period,
this warranty shall also be transferred and be valid for the remaining coverage pe-
riod provided BRP is notified of such transfer of ownership in the following way:

BRP or an authorized BRP distributor/dealer receives a proof that the former
owner agreed to the transfer of ownership, in addition to the coordinates of the
new owner. The distributor will then forward this information directly to BRP.

110

______________

«
...
110
111
112
113
114
...
»

Содержание 2011 GTS Pro





































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2011 GTS Pro

Бренд: Ockelbo Страницы: 64

Invitation Triss Racer

Бренд: BOMBARDIER Страницы: 23

Бренд: Fish Cat Страницы: 6

Бренд: Grady-White Страницы: 78

Бренд: Grady-White Страницы: 102

212 Small Boat Series

Бренд: Hunter Страницы: 70

Бренд: Hunter Страницы: 129

Бренд: Hunter Страницы: 138

Бренд: Pelican Страницы: 2

Бренд: Pelican Страницы: 6

Бренд: Pelican Страницы: 10

Бренд: Sailfish Страницы: 80

Бренд: Jeanneau Страницы: 90

Бренд: Jet Thruster Страницы: 22

Бренд: Zodiac Страницы: 245

Бренд: Skeeter Страницы: 31

Бренд: 3D Tender Страницы: 18

ANNEXE PLANCHER ALU 270

Бренд: orangemarine Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды