Sea-doo 2005 3D RFI Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 123

background image

F22K03Y

1

1. Engine start/stop buttons

6) Indicator Light Cluster

1

2

F22H0MY

MODELS WITHOUT FUEL LEVEL LIGHTS

1. Low oil warning light
2. Warning light

F22H01Y

1

3

2

4

MODELS WITH FUEL LEVEL LIGHTS

1. Low oil warning light
2. Fuel level lights
3. Low fuel level light
4. Warning light

When installing safety lanyard, all
lights will turn on for a brief moment.
This confirms their operation.

The low oil warning light will turn on
whenever oil level is low in reservoir.

CAUTION:

Always replenish oil

reservoir as soon as possible to
avoid serious engine damage.

Models without Fuel Level
Lights

As a reserve indicator, the beeper will
turn on when roughly 5L (1.3 U.S. gal.)
is left and will remain on until tank is re-
filled. Refer to the TROUBLESHOOT-
ING section for the coded signals.

Models with Fuel Level Lights

When safety lanyard is installed and
fuel tank is full, all fuel level lights are
continuously turned on. As fuel lev-
el goes down, the fuel level lights will
turn off one at a time to indicate re-
maining fuel.

As a reserve indicator, the beeper will
turn on and the low level light will con-
tinuously blink when roughly 5L (1.3
U.S. gal.) is left. When roughly 3 L
(.8 U.S. gal.) is left, the light will turn
off. The beeper will remain on until
tank is refilled. Refer to the TROU-
BLESHOOTING section for the coded
signals.

All Models

The warning light will turn on whenev-
er there is a problem with the engine
management system.

It will blink

when there is a problem with the
O.T.A.S.

TM

system or the electric bilge

pump.

NOTE:

When engine is not running

and safety lanyard is on its post, the
warning light will remain turned on un-
til safety lanyard is removed.

7) Steering Pole

In “vert” configuration, the steering
pole can be moved up and down while
driving to suit various riding position.

_____________________

33

www.SeaDooManuals.net

«
...
32
33
34
35
36
...
»

Содержание 2005 3D RFI




























































































































Отзывы:

Нет отзывов

Похожие инструкции для 2005 3D RFI

Platinum Fiesta

Бренд: Aquaglide Страницы: 7

Бренд: Pro-Line Boats Страницы: 71

Бренд: J/Boats Страницы: 67

Бренд: Vanguard Sailboats Страницы: 8

Бренд: Newage Страницы: 39

Бренд: COBIA Страницы: 39

Бренд: Cobalt Digital Inc Страницы: 136

Бренд: Corsiva Yachting Страницы: 33

Бренд: Corsiva Yachting Страницы: 37

Бренд: Baja Страницы: 83

Бренд: Pelican Страницы: 16

Бренд: FAREAST Страницы: 18

MERRY FISHER 815

Бренд: Jeanneau Страницы: 108

MERRY FISHER 855

Бренд: Jeanneau Страницы: 140

Sun odyssey 509

Бренд: Jeanneau Страницы: 166

Бренд: Malibu Boats Страницы: 102

SUPERJET 700 2003

Бренд: Yamaha Страницы: 109

Бренд: Yamaha Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды