Главная
/
Sea-doo
/
2004 GTX 4-TEC Supercharged 6159
/
Руководство оператора

Sea-doo 2004 GTX 4-TEC Supercharged 6159, Руководство оператора

Поделиться

118 страниц до
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139

Страница: 133 / 139

background image

5. WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repair-
ing parts found defective under normal use, maintenance and service, or replac-
ing such parts with new genuine BRP parts without charge for parts and labor, at
any authorized BRP distributor/dealer.

BRP reserves the right to improve or modify products from time to time without
assuming any obligation to modify products previously manufactured.

6. EXCLUSIONS

The following are not warranted under any circumstances:
• Normal wear and tear;
• Routine maintenance items, tune ups, adjustments;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the Operator’s Guide;

• Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP or
resulting from repairs done by a person that is not an authorized servicing BRP
distributor/ dealer;

• Damage caused by abuse, abnormal use, neglect or operation of the product

in a manner inconsistent with the recommended operation described in the
Operator’s Guide;

• Damage resulting from accident, submersion, fire, theft, vandalism or any act

of God;

• Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

• Water damages caused by water ingestion;
• Damages related to gel coat finish including but not limited to cosmetic gel

coat finish, blisters or fiberglass delamination caused by blisters, crazing, spi-
der or hairline cracks; and

• Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

7. LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED,
THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE
EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME JURISDIC-
TIONS DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLU-
SIONS IDENTIFIED ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY.

132

_____________________

www.SeaDooManuals.net

«
...
131
132
133
134
135
...
»

Содержание 2004 GTX 4-TEC Supercharged 6159












































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2004 GTX 4-TEC Supercharged 6159

Бренд: LaserPerformance Страницы: 15

Bavaria 31 'Sunny Side Up' 2008

Бренд: Horizon Yacht Charters Страницы: 27

ALL-STAR 2101112

Бренд: O'Brien Страницы: 8

Бренд: Sea Ray Страницы: 92

Бренд: 3D Tender Страницы: 18

Бренд: Hobie Страницы: 17

Бренд: Regal Страницы: 315

Бренд: Regal Страницы: 326

Бренд: Boston Whaler Страницы: 80

Бренд: Sea-doo Страницы: 456

Бренд: Tiara Yachts Страницы: 166

S4 Standup 2007

Бренд: HSR Страницы: 134

Бренд: TAKACAT Страницы: 4

Бренд: Jeanneau Страницы: 106

Бренд: LaserPerformance Страницы: 9

Бренд: Yamaha Страницы: 164

Бренд: Yamaha Страницы: 106

Бренд: BENETEAU Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды