Sea-doo 2001 GTX Скачать руководство пользователя страница 93

Страница: 93 / 148

Engine Misfires, Misinjects, Runs Irregularly

OTHER

OBSERVATION

POSSIBLE CAUSE

REMEDY

Fouled/defective/worn spark
plugs.

Replace.

Weak spark.

Faulty ignition coil(s) or ECM.

Refer to an authorized
Sea-Doo dealer.

Fuel: Level too low, stale or
water-contaminated.

Siphon and/or refill.

Clogged injectors.

Refer to an authorized
Sea-Doo dealer.

Lean fuel mixture.

Defective sensor or ECM.

Refer to an authorized
Sea-Doo dealer.

Rich fuel mixture
(high fuel
consumption).

Defective sensor or ECM.

Refer to an authorized
Sea-Doo dealer.

Engine Smoke

OTHER

OBSERVATION

POSSIBLE CAUSE

REMEDY

Oil level too high.

Internal engine damage.

Water ingestion, coolant leak
or damaged cylinder head
gasket

Refer to an authorized
Sea-Doo dealer. Refer to an
authorized Sea-Doo dealer.

Engine Overheats

OTHER

OBSERVATION

POSSIBLE CAUSE

REMEDY

Engine coolant level too low.

Refer to

LIQUIDS

Clogged jet pump water
intake.

Clean.

Clogged exhaust cooling
system.

Flush exhaust cooling system.

Quick connect adapter left in
flushing connector.

Remove adapter from
flushing connector and
retry watercraft. If problem
persists, refer to an authorized
Sea-Doo dealer.

_____________________

Содержание 2001 GTX





















































































































































Результаты поиска

Содержание 2001 GTX

Отзывы:

Sea-doo 2001 GTX, Руководство оператора, Страница: 93 / 148

Результаты поиска

Содержание 2001 GTX

Отзывы: