Sea-doo 1997 SPX, Руководство по ремонту

Страница: 7 / 15

IV
WHAT’S NEW 0
THIS SECTION INDICATES PROCEDURES THAT WERE MODIFIED OR NEWLY ADDED IN THIS MAN-
UAL.
ALL SECTIONS
• All sections, were applicable, are updated to include specifications and procedures regarding the GSX
RFI and GTX RFI models (787 RFI engine).
INTRODUCTION
• List of 1999 Sea-Doo models with their corresponding model number.
• A list of abbreviations used in the manual is added in this section.
SERVICE TOOLS AND PRODUCTS
• New tools for servicing RFI engine.
• No more reference numbers to tools from other divisions (Ski-doo and/or Jet-boats). Part numbers are
the same for all divisions.
STORAGE 02-05
• Updated flushing procedure for the 947 engine according to the modification of the cooling water flow.
ENGINE LEAK TEST 04-02
• Section updated to include leak test procedure for 947 engine.
• Testing procedure for RFI engine added.
EXHAUST SYSTEM 04-08
• New resonators added for noise reduction. Identification and procedure for removal and installation.
COOLING SYSTEM 05-02
• Cooling system on the 947 engine has been modified. The cooling water flow through tuned pipe and
engine is circulating the opposite direction.
PRESSURE TEST 06-02
• Testing procedure for pressurized fuel system on the 787 RFI engine.
AIR INTAKE 06-03
• Removal and installation procedure for new air intake silencer on 947 engine.
CARBURETOR 06-04
• New throttle cable with sensor and new procedure for throttle cable adjustment.
WHAT’S NEW