Page 13
REMOTE CONTROL
Handling and location of the remote controller
Use the remote controller at a distance of 26 ft., or less, from the appliance. Point it towards the receiver on the air conditioner.
Communication is confirmed with a beep.
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block the signal from the remote control to the air
conditioner.
Avoid
o
Liquids
o
Direct Sunlight
o
Extreme Temperatures
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly.
If other electrical appliances react to the remote controller, either move these appliances or consult your local dealer.
Replacing Batteries
The remote control is powered by two AAA alkaline batteries housed in the back of the remote. (Do not use rechargeable batteries)
(1) Remove the cover by pressing down and sliding back.
(2) Remove the old batteries and insert the new batteries, observing polarity.
(3)
Replace the battery cover.
NOTE
:
When the batteries are removed, the remote control erases all settings. After inserting new batteries, the remote controller
settings must be selected.
Remote Control Specifications
Rated Voltage
3.0V
Lowest Voltage of CPU
Emitting Signal
2.0V
Signal Receiving Range
26 ft
Environment
-41-140
︒
F
1) The remote control is a sending device only. The display on the control panel of the air
conditioner will indicate changes made by the remote control.
2) The illustrations in this manual are for explanation purposes only. The actual shape of remote
controller may be slightly different.
3) An audible sound will be heard when the buttons are pressed to change settings or modes.