E-14
Down
Down
Strap eyelet
Strap eyelet
Mounting the camera in the Housing
6
Align the camera's Power
Switch with the housing's Power
Switch Lever and then push the
housing's Power Switch Lever
into place.
Push the camera forward
till the knob is locked.
Click
Power
Switch Lever
Set the camera's Power Switch
to OFF position, then pull the
housing's Power Switch Lever
and turn to OFF position.
4
See:
“External Controls” (P.E-16)
Align the guide pins with the
two holes in the camera tray
and then push the camera
forward until it clicks
5
CAUTION
Put the camera's strap eyelets in
the positions shown bay the
arrows.
Pull the focus/zoom dial out and
rotate (to lock out the internal
gearing so the lens gear and
internal gear do not impact) then
slide the camera in the housing.
Pull the focus/zoom dial out and rotate
so that the convex part of the dial is not
engage in either of the grooves.
This locks out the internal gearing.
Location of
Power Switch Lever
inside the housing.
