1
Important Notice
•
This equipment is intended for permanent connection and does not have an on/off switch.
•
Do NOT adjust or alter the device or its enclosure (including labelling/marking).
•
Do NOT use the device for any other purpose other than that intended by SE Controls.
•
Do NOT allow installation of the device by unqualified persons.
•
Failure to install the device in accordance with the manufacturer’s instructions will invalidate any
warranties.
•
Unless otherwise indicated, you must not adjust or remove existing manufacturers cabling or use
terminal outputs or inputs for purposes other than their design without written authorisation from SE
Controls.
SE Controls accepts no liability for failure to comply with the above statements or the installation and
operation guidance in the following sections of this guide and reserves the right to invalidate the
warranty of the controller.
