Installation
Please keep these operating instruction for future reference and maintenance
Subject to technical modifications. diagram is not binding
P
age 7
C: Bottom hung / slope window installation
i.
Fix the trunnion set(2) in the mid position on the moving part of the window using the holding bracket (4) provided.
ii.
Close the window, then fix the chain actuator body(1) with the pivot bracket set(3) provided. It should be aligned with the trunnion
set(2) on the moving part of the window. Caution: misalignment will cause improper opening and closing of the window.
iii.
Fix all screws in the trunnion set(2) and pivot bracket(3) firmly. (make sure sufficient space is allowed for the actuator body to
rotate)
iv.
Fix the pin to connect the trunnion set(2) to the top part of the chain.
v.
Switch on the power supply to test run the actuator for a few cycles, make sure the opening and closing of the window is smooth
and free from obstruction.
vi.
Repeat the above if adjustment is required.
Connection
AC 230v version (4 wires)
