+44 (0)1543 443060
www.secontrols.com
Please keep these operating instructions for future reference and maintenance.
Subject to technical modifications. Diagram is not binding.
•
Building regulations 2002
•
Health and Safety at Work Act 1974
•
I.E.E Regulations
•
Regulatory Reform (Fire Safety) Order 2005
•
At least once a year, check that the power
cable and connection has not been damaged
and that it shows no sign of wear
•
Check that no object obstructs the window
movement.
•
If faults arise, never work on the actuator
and never open or dismantle parts of the
actuator that deny access to the inside of the
mechanism.
•
If the actuator fails to function or is damaged,
contact SE Controls.
•
Do not use the actuator until it has been
repaired.
The system must be protected against
unintentional re-starting.
All smoke ventilation systems must be
periodically (annually) checked, serviced,
maintained and, if necessary, repaired and re
tested by a authorised, trained and competent,
safety conscious persons.
Maintenance shall be carried out in accordance with the
requirements of;
In order to keep the equipment in optimum operating
condition it is recommended that ventilation systems are
similarly maintained.
There are no user repairable parts in this equipment.
Basic checks that can be carried out include;
A suitable service contract with SE Controls is
recommended for this purpose.
The gear system is greased for life and is maintenance free.
After maintenance, repair or any changes to the system
check all functions by a trial run.
Defective equipment must only be repaired by
SE Controls. Only original spare parts are to be
used.
1.6 Maintenance
Always disconnect the motor’s supply voltage and batteries
during cleaning or maintenance operations, especially if the
actuator is equipped with an automatic control device.
