SE Audiotechnik M-F3A, Руководство пользователя

Страница: 25 / 37

中文
EN
D
LCD PL
ATE AMPLIFIER
49 48
FACTORY PRESETS
The subwoofers always have to be operated with one of the factory presets from the Preset Library ,
which are the basis for the user presets. If the Preset Library on your product differs from the list shown
below, please check your firmware version in the System Settings > SW Information menu and contact
your dealer to update it.
S12 PRO
In June 2020 with the firmware 20200803 , the structure of the presets was improved. Before, there was
only one preset to work with M-F3A PRO line arrays but in order to provide more flexibility, an additional
preset for M-F3A PRO was added. The difference between both lays in the Low-pass filter of the crossover
and thus, in the character of the sound in that range.
Basically, the new crossover improves the phase matching between the subwoofers and the top boxes,
yielding a better addition at the cut-off frequency and a more flat response in this region. Conversely, the
original preset presents a boost around 80 Hz, giving a more "punchy" sound in the low frequencies.
In addition to this change, the new versions of the S12 PRO firmware includes the Directivity menu,
which offers wider possibilities to deploy subwoofer setups. Therefore, the presets for Cardioid and
End-Fire setups were removed and the new bank of presets is as follows:
Product Preset Name Description
MF3AP_O:Origin.
Default preset for systems comprising M-F3A PRO units.
Original crossover for a "punchy" sound character.
MF3AP_N:Neutral
Default preset for systems comprising M-F3A PRO units.
New crossover offers improved phase match and a more
flat response.
M-F3A MF3A:Default Default preset for systems comprising M-F3A units.
GENERAL
GENERAL General preset for use with other products systems.
S15 PRO
The factory presets available for S15 PRO are:
Product Preset Name Description
M-F3A PRO MF3AP Default preset for systems comprising M-F3A PRO units.
M-F3A MF3A Default preset for systems comprising M-F3A units.
SMX 12A SMX12 Default preset when using SMX 12A monitor as PA unit.
GENERAL GENERAL General preset for use with other products systems.
M-F3A FS
The list of available presets for the M-F3A FS subwoofer is shown below:
Product Preset Name Description
M-F3A PRO
MF3AP Default preset for systems using M-F3A PRO units.
MF3APO
1
Preset for "Overlap" responses between the subwoofer
and the M-F3A PRO units.
M-F3A
MF3A Default preset for systems using M-F3A units.
MF3AO
1
Preset for "Overlap" responses between the subwoofer
and the M-F3A units.
GENERAL GENERAL General preset for use with other products systems.
1
Creates a boost in the Low-Mid range of the whole system, preferred for some applications.