
12
1
2
3
3. - OPENING AND CONTROL
Carefully open the package, check the content and make sure that all the parts are present
and are in good condition. In cases where some parts are not present or are damaged,
immediately contact Your supplier and retain the packaging for verification.
WARNING!
If the product has been exposed to drastic temperature changes, let
the unit turned off until it reaches room temperature because the
presence of condensation can damage the product if it is turned on.
Verify that the box contains the following items:
N° 1
SG FASTER4
N° 1
Power supply unit
N° 1
User Manual
4. – INSTALLATION, SWITCH ON AND USE
INSTALLATION
Install the device on a plane surface or install on a wall.
Connect the connection cable of the power unit with the DC in socket. Plug the power unit
into your outlet.
DMX-512 CONNECTION WITH THE PROJECTORS
The wires must not come into contact with each other, otherwise the fixtures will not work at
all, or will not work properly.
Only use a stereo shielded cable and 3-pin XLR plugs and connectors, in order to connect the
controller with the fixture or one fixture with another.
1 – Power switch
2 – Power IN
3 – Dmx OUT
Содержание FASTER6
Страница 1: ...FASTER 6 CONTROLLER DMX 6 CH Order code SG FASTER6 MANUALE UTENTE USER MANUAL ...
Страница 15: ...15 ...
Страница 16: ...16 ...