EN-5
- Press the "Source" Button and select
USB, USB will show on the RED LED
display.
- Insert the USB stick.
- Select your favorate music by pressing
TU
or TU
.
- Press "REP” to repeat once for the
current song, Press again "REP" to
repeat all songs.
If unit is playing on Bluetooth mode
“BT”, it will automatically switch to
USB mode when the USB stick is inserted.
Important:
The USB port is intended for data transfer only, Other devices cannot be
used with this USB connection. The use of USB extension cords is not
recommended
-
Press the "Source" Button and select
LINE,LINE will show on the RED LED
display.
-
Plug in your 3.5mm cable into the LINE
Input on the side panel and the unit will
enter into LINE IN mode.
-
You can connect any audio device that
has 3.5mm audio output jack and
playback any audio from the connected
device.
-
Unit comes with a battery indicator alert.
-
If Battery Low LED flash, it means the
battery level is low and recharging is
required.
-
By connecting the AC power, the Battery
Full LED will turn orange, it means the
unit is under recharging.
-
The Battery Full LED become green, it
means the level of battery is fully charged.
It is recommended to charge the battery about 6 hours before you start using
the unit for the first time.
LINE IN
RECHARGING
REP
TU
-/
TU
+/
1
2
3
SOURCE
POWER
L INE IN
DC JACK
USB
1 A CHARGER
MIC 1
ON
OFF
MIC 2
USB PORT
