background image

7.0 Warranty and Service 

Page 9 

WARRANTY 

The PPS-2RM-B is warranted  to  be  free  of  defects  under  normal  operating conditions, 
as specified, for one year from date of shipment from SpectraDynamics, Inc (SDI).  SDI

s  

obligation and liability under this warranty is expressly limited to repairing or replacing, at 
SDI

s  option,  any  product  not  meeting  the  said  specifications.    This  warranty  shall  be  in 

effect for one (1) year from the date a PPS-2RM-B  is sold by SDI.  SDI makes no other 
warranty,  express  or  implied,  and  makes  no  warranty  of  the  fitness  for  any  particular 
purpose. SDI

s obligation under this warranty shall not include any transportation charges 

or costs of installation or any liability for direct,  indirect,  or  consequential  damages or 
delay. Any improper use, operation beyond capacity, substitution of parts not approved by 
SDI, or any alteration or repair by others in such manner as in SDI

s reasonable judgement 

affects  the  product  materially  and  adversely  shall  void  this  warranty.    No  employee  or 
representative of SDI is authorized to change this warranty in any way or grant any other 
warranty. 
 

SERVICE 

Do  not  attempt  to  service  or  adjust  the  instrument  unless  another  person,  capable  of 
providing first aid or resuscitation, is present. 

Please remember that any alteration or repair 

may void the warranty. 

Contact SDI with any questions or to request an RMA if a repair is 

needed. 
 
SpectraDynamics, Inc. 
1849 Cherry Street Unit 2. 
Louisville, CO 80027 
USA  
 
Tel:  (303) 665-1852 
Fax: (303) 604-6088 
[email protected] 
www.spectradynamics.com 

Содержание PPS-2RM-B
















Отзывы: