Important Safety Information:
• Please thoroughly read this set of instructions and retain for future use.
• All products manufactured and supplied by Scudo are safe provided they are installed,
used correctly and receive regular maintenance in accordance with these instructions.
• To safely install this product please employ the the services of an experienced
plumber.
• These fittings must meet the requirements, and be installed in accordance with the
Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
• Check there are no missing or damaged parts before installation.
• Before starting any installation please consider the following:
• Before drilling into walls, check that there are no electrical wires, cables or
water supply pipes. This can be checked with a electronic detector
• When using power tools do not forget to: - Wear appropriate PPE
- Unplug equipment after use
•
Warning:
Before installing the new shower valve, it is essential that you
thoroughly flush through the pipework in order to remove any remaining swarf,
solder, etc. Failure to carry out this procedure could cause problems or damage
to the workings of the shower valve.
• Advised to install appropriate isolation to the inlet feeds.
• Do not block the flow of water from the showerhead by placing it (smoothering it) on
your hand or any other part of your body or foreign object.
• Do not crush or kink the shower hose, this could damage the hose causing leaks.
•
Warning:
Do not operate this product if you suspect it is frozen. Do not site
mixing valve where it might be subjected to freezing conditions.
• These shower valves
must
not be modifed in any way as this will invalidate the
guarantee.
