Scubatech R TEC Скачать руководство пользователя страница 9

21

WARRANTY CARD

of SCUBATECH  pressure regulator, breathing apparatus

The warranty coverage has a ten year warranty by SCUBATECH for the first user of the
pressure regulator, breathing apparatus and ensures that it is free from production and
material defects .  The following requirements must be fulfilled for the validity of the
warranty card:
1. The purchase must be made in a SCUBATECH  authorized shop.
2. The owner of the pressure regulator, breathing apparatus is the person listed on the

warranty card.

3. The servicing of pressure regulator, breathing apparatus must be conducted at least

annually by an authorized SCUBATECH service center.

4. The instructions on how to use, operate and maintain the pressure regulator , breathing

apparatus must be followed.

IMPORTANT !

Inspections or servicing conducted by unauthorized persons lead to the loss of warranty.
Defects caused by improper operating or mechanical damages are not covered by the
warranty.

HEADQUATERS OF THE COMPANY:
SCUBATECH LTD.
DERDOWSKIEGO STREET 8
71-087 SZCZECIN
TEL/FAX: (004891) 453 00 17

The owner’s name
……………………………………………………………………………………………..

Adress
………………………………………………………………………………………………
……………….

Model
………………………………………………………………………………………………
……………….

Date of purchase:                                                                Stamp and signature of seller:

SCUBATECH Sp. z o.o.

ul. Derdowskiego 8

71-047 Szczecin

tel.: 0 91 453 00 17

[email protected]

Содержание R TEC











Отзывы: