9 Packet-Radio
129
MStamp
activates the time stamp for packets that are displayed via the monitor.
9.8.22
MText
Default setting: '>>> Welcome...'
Parameter: String
of
249 characters, maximum.
Identical to the
CText
-command in the
pac:-
menu, however sets the connect-text for
the PR-mailbox. The default text is as follows:
>>> Welcome to %'s PTC-IIIusb Mailbox <<<
Please type H for help.
The
MText
input is done via the normal command interpreter, so a convention for the
<CR> character has to be used: The <CR> is represented within the
MText
string by #.
This would be input like:
pac:
MT
>>> Welcome to %'s PTC-IIIusb Mailbox <<<## Please type H for help.
<Return>
The same as in
CText
, the % character serves here as a dummy for the appropriate
MYCALL, independent if it is a BBS callsign or the normal MYCALL. The SSID of the
MYCALL is ignored.
For example if DL1ZAM-8 is the BBS-MYCALL, then the PTC-IIIusb will give the
following message:
>>> Welcome to DL1ZAM's PTC-IIIusb Mailbox <<<
Please type H for help.
The
MText
always follows the message from the automatic
mail notifier
, i.e.
"*** NO
new MSG for you
" or "
*** 2 new MSGs for you
" or similar.
The
MText
cannot be turned off.
9.8.23
MYAlias
Default setting: SCSPTC
Parameter: CALL Alternative station callsign.
MYAlias
is handled as
MYcall
for incoming connects, and can also be used as an
alternative station callsign.
If the PTC-IIIusb is called by the
MYAlias
callsign as a digipeater, he works as a cross
port digipeater, i.e., packets received at port 1 are send out at port 2 and vice versa. The
kind of modem at the relevant port is not important, because of this cross digipeating
from 1200 baud to 9600 baud and vice versa is possible.
The default of the
MYAlias
callsign is the PACTOR MYCALL entered first of all., but
gets the SSID 15. If for example the global MYCALL on the PACTOR is set to
DL6MAA, the PTC-IIIusb sets the MYAlias to DL6MAA-15. This default setting can be
changed at any time using the
MYAlias
command of the
pac:-
menu.