ScreenTronic CONTROLtronic ST2134, Руководство по эксплуатации и установке, Страница: 9 / 44

ST2134 Operation and Installation Manual
9
Quick Start
Focus of ST2134 and ScreenTronic
®
app is easy and intuitive configuration and operation of smart
blind control for everybody without special technical knowledge.
Only two touch operations on the ST2134 and one touch operation in the ScreenTronic
®
app (or
operation of local switch connected to ST2134) are necessary to make full configuration of one blind:
Preparation
1) Download ScreenTronic ® app from Apple App Store, start application and confirm standard
configuration.
In development:
A small project is automatically created (if there is not already an old project in the app) and
first blind control is added to first zone and the corresponding graphical blind control is shown.
2) Connect the blinds and power supply to ST2134 and integrate the ST2134 in same network
(Wi-Fi) of the iOS device (iPod touch, iPhone or iPad) and power the ST2134.
Note: The network must provide a DHCP server.
Warning: Take installation instructions in consideration!
The connected blinds are automatically initialized (Init): checked, addressed and blind
configuration read (e.g. blind type (venetian, roller, …), tilt only, tilt time, …) and the channel
behavior of ST2134 matched to the connected blind.
Note: this may take up to one minute (until green LED “Init” switches off).
Configuration
(Assignment of a blind to a control group or a local control switch)
3) Press Blind select button of ST2134 -> Blind 1 is selected
(cyan LED indicates selected blind / another touch selects next blind)