7
At this step, you have to connect to the incoming power cable of the cable coiler fixed at the
ceiling a plug and connect it to the mains up in the ceiling.
Fig. 7
10.
Now fix the power connector box to the beam the as shown in Fig. 8 and connect
the end of output power cable of the cable coiler to the power cable that comes out of the
screen housing
.
11. At this step, you have to connect the incoming power cable of the cable coiler to the
mains 220V (see page 3).
WARNING:
Once you have installed the product, when you switch on the
Screen Winch System you will hear a rhythmical ticking which means that the
safety device is working properly.
L FORM BRACKET
WIRE CLAMP
Fig. 8
