ScreenBeam 1100 Plus, Руководство пользователя, Страница: 74 / 107

70
3.
Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
V.3.8 Network Settings
This section introduces settings about network connection, such as local Wi-Fi networking
mode, CMS interface/Internet WAN interface assignment, connection and TCP/IP settings
for Ethernet/Wireless interface, etc.
V.3.8.1 Setting up Local Wi-Fi Network Mode
The receiver provides a local Wi-Fi network for wireless display over LAN and receiver
management. This network can be routed to an external network through the receiver’s
Ethernet or wireless interface so that the device that connects to the local Wi-Fi can have
access to the Internet.
To set up the receiver’s local Wi-Fi network mode, follow this procedure:
1.
Go to the
Network Settings
tab page by clicking the
Network Settings
tab.
2.
Go to the
Local Wi-Fi Network
section, and select an option from the
Select Network
Mode
box. There are three options available:
NAT
,
Bridge
, and
None
.
 NAT
: The receiver’s local Wi-Fi network is routed to the network where the Ethernet
or wireless interface connects by NAT method.
 Bridge
: The receiver’s local Wi-Fi network is routed to the network where the
Ethernet or wireless interface connects by Bridge method.
 None
: The receiver’s local Wi-Fi network is not routed to the network where the
Ethernet or wireless interface connects.