The power cord will exit from the left hand side of the box, unless ordered otherwise. Now power the screen
down while being careful of the following warning.
Note: The door should open in the first second of operation, if this fails to happen, stop the screen at once, and
open it by hand, as sometimes the door is forced closed during transportation or installation.
Specifications
The dimensions below are indicative of standard specifications, but if the screen is of a side tension variety, then
the following specifications are not relevant, so please seek clarification if necessary.
Width Height
Length
Weight
206 mm
200 mm
456 mm Longer than the Screen
Picture Width
60 TO 100KG
For Screen Picture Width see the specified screens technical sheet or seek advice from the sales department.
Connect Control Module – Standard
The following procedures requires access to the Connect Module through removal of the control box lid and as
such you MUST remove all power from the unit before proceeding otherwise electrocution or serious injury may
occur.
rc
v
I
R
LED
U
C
D
Connect Network
In
Out
Contact Close
Input
IR Receiver
Input
Connect Network
In
Out
Next Connect Module
Maximum 9 Modules
Up
Down
Momentary Contact Close
rc
v
I
R
M
Motor Output
240 V
Input
IEC
Socket
1 2 3 4
Motor Wiring
Pin 1 - Brown Screen Down
Pin 2 - Black Screen Up
Pin 3 - Yellow/Green Earth
Pin 4 - Blue Neutral
Infra Red
Receiver
RJ12 Connector
6 Core wired
straight through
In
Out
4
1
2
3
5
