ClearPix Integrated Type J Fixed Frame Screen - Installation Manual
5
Revision A, 2005.03.10
Projection Screen Material Installation
4.
Position the projection screen material using the
short (2” / 50mm) pieces of Pi-Grip. Place them in
the order shown. Tension the fabric only slightly at
this time.
IF YOUR FRAME CAME WITH CLEARPIX1 FABRIC AND
BLACK BACKING, clip both the projection screen
material and the Black Backing together.
5.
Tension the fabric using the long pieces of Pi-Grip.
Remove the short piece of Pi Grip and insert the
long piece of Pi-Grip in its place. Begin at one end
of the Pi-Grip and work your way towards the other
end. You should be able to insert it by hand, but you
may use the included mallet if necessary. As you
insert the Pi-Grip, apply gentle tension on the fabric
along the axis of the Pi-Grip that you are inserting.
6.
Once you have fi nished clipping the fabric, verify
that the tension is even and suffi cient. You may
want to lift the frame and inspect the front side. If
necessary, retension the fabric by removing and
reinserting the Pi-Grip.
Once you are satisfi ed with the tension, trim the
excess fabric with the fabric cutting tool. Leave
about 1.5” (40mm) of spare fabric outside of the
edge of the PI-Grip for future potential retensioning.
7.
IF YOUR FRAME CAME WITH CLEARPIX2 OPTIONAL
BLACK BACKING, repeat the operations as explained
steps 3 to 6 but clipping your Black Backing in the
second groove.
�
�
�
�
1.5”
40 mm