Scrambler Ducati 1100 Скачать руководство пользователя страница 25

Страница: 25 / 246

Refuelling

Refuel outdoors with engine off.

Do not smoke or use open flames while refuelling.

Be careful not to spill fuel on engine or exhaust pipe.

Never completely fill the tank when refuelling. Fuel

should never be touching the rim of filler recess.

When refuelling, avoid breathing the fuel vapours

and prevent fuel from reaching your eyes, skin or

clothes.
Fuel label

Fuel identification label (Fig 1)

Attention

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage of

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

Attention

In case of indisposition caused by breathing

fuel vapours for a long time, stay in the open air and

contact your doctor. In case of contact with eyes,

thoroughly flush with water; in case of contact with

skin, immediately clean with water and soap.

Attention

Fuel is highly flammable, in case of accidental

spillage of fuel on your clothes it is necessary to

change into clean clothes.

Fig 1

Содержание 1100























































































































































































































































Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды

Scrambler Ducati 1100, Руководство пользователя

Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды