Pocket Camera SG560-8M
4 Advanced Operations
b) Press
UP
or
DOWN
to select
Capture Number
.
c) Press
RIGHT
to select
3 Images
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.8
Set Video Length
Press
RIGHT
to decreases or increases the value by 1 second.
The following shows how to set video length to
5 Seconds
provided that the previous
value is
1 Seconds
:
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Video Length
.
c) Press
RIGHT
to increase to
5 Seconds
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and exit.
4.1.9
Set Triggering Interval Time
This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will not
react to the motion of human (or animals). The minimum interval is 0 second, it means the
PIR works all the time. The maximum interval is 1 hour, it means the PIR will be disabled
for 1 hour after each triggering. The default value is 1 minute.
Press
RIGHT
to decreases or increases the value by 1 second or 1 minute.
The following shows how to set triggering interval time to
5 Minutes
provided that the
previous value is
1 Minute
.
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Interval
.
c) Press
RIGHT
to decrease or increase to
5 Minutes
.
d) Press
OK
to save the current setting and the option will be un-highlighted.
Press
MENU
to cancel setting and return to info display.
4.1.10
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are four parameters:
High,
Normal, Low
and
PIR off.
The default value is “Normal”. The higher degree indicates that
the Camera is more easily to be triggered by motion, taking more pictures or recording
more videos. It is recommended to use high sensitivity degree in room or environment
with little interference, and to use lower sensitivity for outdoor or environment with lots of
interference like hot wind, smoke, near window etc. Furthermore, the sensitivity of the PIR
is strongly related to the temperature. Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher sensitivity for high temperature environment.
It is recommended to use
Normal
mode. The following shows how to set PIR
sensitivity as
Low
provided that the previous option is
Normal
.
a) Press
MENU
to display the setting menu.
b) Press
UP
or
DOWN
to select
Sense Level
.
Page
10
