Scout Camera SG560P-8M
4
Advanced
Operations
Page 15
un-highlighted.
Press MENU to exit.
4.1.8
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are
four parameters: High, Normal, Low and off. The default value is
“Normal”. The higher degree indicates that the Camera is more
easily to be triggered by motion, taking more pictures or recording
more videos. It is recommended to use high sensitivity degree in
room or environment with little interference, and to use lower
sensitivity for outdoor or environment with lots of interference like
hot wind, smoke, near window etc. Furthermore, the sensitivity of
the PIR is strongly related to the temperature. Higher temperature
leads to lower sensitivity. Therefore it is suggested to set a higher
sensitivity for high temperature environment.
The following shows how to set PIR sensitivity as Low provided
that the previous option is Normal.
a)
Press MENU to display the setting menu.
b)
Press “
▲
” or “
▼
” to select PIR Sensitivity.
c)
Press “
►
” to select Low.
d)
Press OK to save the current setting and the option will be
un-highlighted.
Press MENU to return to info display.
4.1.9
Set PIR Triggering Interval
This parameter means that how long the PIR (Passive Infrared
motion sensor) will be disabled after each triggering in ON mode.
